Air entrainment plays a vital role in concrete performance. Those tiny, microscopic bubbles improve workability and increase resistance to freeze-thaw cycles, scaling, and cracking.

But here’s the problem: those same bubbles are extremely sensitive. Even small changes in your materials or environment can result in significant fluctuations in your final air content.

In this post, we’ll cover three of the most common — and most universal — reasons why air content changes so often, and how Fritz-Pak’s powdered air-entraining admixtures can help you keep every load within specifications.

1. How Aggregates Affect Air Content

Air in concrete consists of tiny bubbles within the mix. Aggregate shape and texture determine how well bubbles survive transit and placement.

  • Round aggregates, such as natural sands and river rock, are smoother and less likely to rupture the bubbles. Mixes with these aggregates usually have more predictable air contents.
  • Angular or crushed aggregates, like manufactured sands or chipped stone, have sharper edges that tend to pop bubbles as the mix is agitated. This causes air to drop more quickly.

If you’ve ever noticed that one sand source gives you consistent results while another creates unpredictable fluctuations, aggregate shape is likely the reason.

2. How Cement Content Affects Air Content

Cement can also have a major impact on air entrainment. Specifically, the Loss on Ignition (LOI) value — which measures carbon impurities in cement — affects how stable your air bubbles will be.

The higher the LOI (more impurities), the more those carbon particles interfere with the surface tension of the bubbles, causing your air content to drop.

That’s why mixes with higher cement contents, such as 7000 psi designs, often show greater variation in air than simpler 3000 psi mixes. The more cement you have in the mix, the greater the potential for changes in air stability.

3. How Temperature Affects Air Content

Temperature is another major variable that can’t be ignored.
As the temperature of the concrete mix rises, the air content tends to fall. Hotter water and warmer conditions create less stable bubbles that break down more easily. Cooler mixes, on the other hand, hold their air better.
You’ve probably seen this in your own operations: the trucks that go out early in the morning have stable, predictable air, while the ones dispatched in the heat of the afternoon tend to run low.

Why Variations Are Inevitable

Even the most consistent ready-mix operation can’t control every variable. You might switch between different sand suppliers, change mix designs, or experience major temperature swings throughout the day.
No matter how effective your quality control procedures are, some variation in air content is unavoidable. The key is being ready to correct those fluctuations when they happen — before they cost you a load.

The On-Site Solution: Fritz-Pak Air Plus and Super Air Plus

To help ready-mix producers and contractors regain control of their air content, Fritz-Pak manufactures two convenient powdered air-entraining admixtures: Air Plus and Super Air Plus.
Both products are packaged in water-soluble bags, making them easy to add directly to the truck at the job site — no measuring, no mess, and no guesswork.

  • Air Plus increases the air content of a full truckload of concrete by approximately 0.5%.
  • Super Air Plus increases air by about 1% per truckload, thanks to a higher concentration of active ingredients.

These products are designed for quick, reliable air correction in ready-mixed concrete, helping you save loads that might otherwise be rejected.

Choosing the Right Air Entrainer for Your Operation

Which product should you keep on hand? It depends on the variability of your operation.

  • If you experience frequent air fluctuations due to changing aggregates, variable cement contents, or extreme temperature changes, Super Air Plus is your best choice.
  • If your materials are consistent and your climate is stable, Air Plus will likely meet your needs.
  • Both products are proven, convenient, and cost-effective ways to maintain consistent air content — and protect your bottom line.

Order Today

If you’re ready to stop losing loads to unpredictable air content, visit the online store to order your case of Air Plus or Super Air Plus today. Don’t forget to follow our social media pages for more information about how our products can improve your concrete.