Supercizer 7

  • Overview
  • Packaging
  • FAQs
  • Advantages
  • Resources

Fritz-Pak’s Supercizer 7 is not only a premium superplasticizer, it is a delay set superplasticizer. This powerful product offers the benefits of both a high-range water reducer and a set retarder. It is recommended for use in a variety of formwork, including ICF, to provide the correct flow and strength while also reducing the risk of cold joints in the wall. The delay set feature of the products helps keep the first layer of concrete plastic as you work your way around the forms. As a premium superplasticizer, this admixture offers up to 40% water reduction and a Supercizer 7 does not contain hazardous materials and comes packaged in our signature water-soluble bags.

Learn More About Our Delay Set Superplasticizer

For more information about using a delay set superplasticizer in your concrete, check out the product video below. Don’t forget to follow our social media for more information about how our admixtures can improve your concrete.

Item# Description Bags/Case Bags/Pallet Cases/Pallet
971402.5 lb. water soluble bag18 25
9714250 lb. paper bag 40
Which states have approved Supercizer 7 through the Department of Transportation?
Arizona, Colorado, Georgia, Idaho, Indiana, Iowa, Kansas, Kentucky, Mississippi, Missouri, Montana Ohio, Oregon, South Carolina, Tennessee, Texas, Vermont, Virginia, Wyoming, Louisiana, New Hampshire, & New Mexico
Will it discolor the concrete?
No. In fact, adding Supercizer 7 before adding color will improve the mixing of color into the concrete.
Will it change the set time?
Yes. Supercizer 7 is a retarding superplasticizer.
Will Supercizer 7 affect the air content of my concrete?
No, at the recommended dosage rate, no change in entrained air content should occur.
Will it change my concrete strength?
If you use less water when adding Supercizer 7, your concrete will be stronger. If your water content is not changed, strength is not changed.
Is Supercizer 7 good for shotcrete?
No. For shotcrete we recommend the use of Supercizer 5.
  • Designed for very high early and ultimate strength with smoothest possible finish.
  • Excellent for Precast/Prestressed Concrete.
  • Steam curing may be reduced or eliminated.
  • Up to 40% water reduction.
  • Improves concrete workability
  • Higher strengths may be achieved more economically
  • Improves cohesiveness and reduces concrete segregation
  • Easily adaptable to fast track paving applications
  • Beneficial in all types of high strength concrete applications
  • Allows concrete placement in difficult access or heavily reinforced areas
  • Produces concrete with lower permeability
  • Concrete achieves higher durability
  • Reduced shrinkage cracks and creep
  • Higher modulus of elasticity
  • Type I cement may be substituted for Type III cement
  • No need for admixture dispensers because Supercizer 7 is packaged in a patented water-soluble Fritz-Pak inner bag for convenient use at the plant or job site


Supercizer 7 is compatible with all air-entraining admixtures, calcium chloride and other admixtures. When used with other admixtures, each one must be dispensed separately into the mix.

Applicable Standards

This product meets the following specifications:

  • ASTM C-494 Type F
  • AASHTO M-194
  • CRD C-87