fbpx

Supercizer 2

Applications:
  • Overview
  • Packaging
  • FAQs
  • Advantages
  • Resources

Supercizer 2 is a powerful slump enhancing admixture with a delay set feature. When added to ready-mixed concrete, Supercizer 2 provides up to seven inches in slump enhancement, 20% water reduction, and up to one hour of set delay. The delayed set feature of this product makes it ideal for use during the hot summer days, or when working with formwork to reduce the risk of cold joints. Supercizer 2 doesn’t contain hazardous or corrosive materials and comes packaged in our signature, water-soluble bags.

Using a Slump Enhancing Admixture

For more information about how our slump enhancing admixture, Supercizer 2, check out the product videos below. Don’t forget to follow our social media channels for more information about how our admixtures can improve your concrete.

Item#DescriptionBags/CaseCases/Pallet
955901.75 lb. water soluble bag2030
955961.1 kg. water soluble bag1825
9559150 lb. paper bag140
How long will the slump gain last?
Slump gain will remain in effect for 60 to 90 minutes.
Will it change the set time?
Supercizer 2 is a slight retarder. In temperatures between 50° and 70° F you may see up to an hour of set retardation.
Will it affect the air content?
t may increase air content up to 2%. If air content is critical in your application eliminate the addition of air entrainment admixture at the plant and correct the air content at the jobsite using Super Air Plus if needed.
Will it change my concrete strength?
If water is reduced during the batching, you should expect an increase in strength. If water content is not changed, you will not see any changes in concrete strength.
Do you recommend Supercizer 2 for use in the winter?
No. Supercizer 3 or Supercizer 5 should be used in the winter.
Can the concrete be redosed if slump starts to change?
Yes. You may redose to maintain your slump.
Is Supercizer 2 compatible with other superplasticizers?
Supercizer 2 is compatible with most other superplasticizers. However, due to the constant change in formulations by other manufacturers, we strongly recommend testing for compatibility with other superplasticizers. For specific applications, contact Fritz-Pak Corporation.
  • Specifically designed for warm weather
  • Water reduction of up to 20% or slump increase up to 7″
  • Slump control at the job site without adding water
  • Long lasting slump life facilitates extended delivery and placement requirements
  • Higher early and ultimate strengths
  • Improves concrete workability with no loss in strength
  • Addition of Supercizer 2 will not affect the water-cement ratio
  • Higher strengths may be achieved more economically
  • Improves cohesiveness and reduces concrete segregation
  • Produces concrete with lower permeability
  • Concrete achieves higher durability
  • Allows concrete placement in difficult access or heavily reinforced areas
  • No need for admixture dispensers because Supercizer 2 is packaged in a patented water soluble Fritz-Pak inner bag for convenient use at the plant or job site

Compatibility

Supercizer 2 is compatible with all air-entraining admixtures, calcium chloride and other admixtures. When used with other admixtures, each one must be dispensed separately into the mix.

Applicable Standards

This product meets the following specifications:

  • ASTM C-494 Type D
  • AASHTO M-194
  • CRD C-87

    Technical Documents