Fritz-pak Corporation
More Information

Product Description

PDFs in English

Product Bulletin #103
Materials Safety Data Sheet

Applicable Standards
This product meets the following specifications:
  • ASTM C-494 Type D
  • AASHTO M-194
  • CRD C-87
Samples

Request a Sample

Catalog

Entire Product Catalog

Supercizer 2 FAQ

Category: Superplasticizers

Q. How long will the slump gain last?

A. Slump gain will remain in effect for 60 to 90 minutes.

Q. Will it change the set time?

A. Supercizer 2 is a slight retarder. In temperatures between 50° and 70° F you may see up to an hour of set retardation.

Q. Will it affect the air content?

A. It may increase air content up to 2%. If air content is critical in your application eliminate the addition of air entrainment admixture at the plant and correct the air content at the jobsite using Super Air Plus if needed.

Q. Will it change my concrete strength?

A. If water is reduced during the batching, you should expect an increase in strength. If water content is not changed, you will not see any changes in concrete strength.

Q. Do you recommend Supercizer 2 for use in the winter?

A. No. Supercizer 3 or Supercizer 5 should be used in the winter.

Q. Can the concrete be redosed if slump starts to change?

A. Yes. You may redose to maintain your slump.

Q. Is Supercizer 2 compatible with other superplasticizers?

A. Supercizer 2 is compatible with most other superplasticizers. However, due to the constant change in formulations by other manufacturers, we strongly recommend testing for compatibility with other superplasticizers. For specific applications, contact Fritz-Pak Corporation.

Fritz-pak
Fritz-Pak Corporation NRMCA ACI ASCC ACPA Concrete Pumping